Aquamat-Elastic

AQUAMAT-ELASTIC-WHITE-EN.png

Two-component, highly flexible, cement-based waterproofing slurry

Two-component, highly flexible, cement-based waterproofing slurry. Suitable for waterproofing substrates that show or are expected to show hairline cracks due to contraction-expansion or vibration. Ideal for flat roofs, swimming pools, above ground water tanks etc. Also used for waterproofing under tiles combined with the elastic tile adhesive ISOMAT AK-ELASTIC. Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. CE marked.

Download the technical specifications

Isoflex-PU 500

ISOFLEX_PU_500_528cab9fa0678.jpg

One-component polyurethane, liquid waterproofing membrane for flat roofs

One-component, polyurethane, liquid waterproofing membrane for flat roofs and balconies, offering excellent mechanical, chemical, thermal, UV and weather resistance. Forms a uniform, elastic, vapor-permeable sealing layer. It is applicable, even on irregular substrates and suitable also for green roofs and flower beds. Certified according to EN 1504-2 and ETAG 005 part 1 & 6, ETA-15/0206. Classified as a coating for surface protection of concrete. CE marked.

Download the technical specifications

Isoflex-PU 650

ISOFLEX-PU-650.png

One-component, transparent, UV-stable, polyurethane, liquid waterproofing membrane

Transparent, aliphatic polyurethane, liquid membrane for waterproofing over existing surfaces, such as old tile layers, natural stones, wood, glass blocks, plastic materials, etc. Intended for use as a transparent binder resin for decorative stone carpet floorings and as a transparent sealing membrane over decorative flake floorings. Οffers an even, glossy effect, which does not turn yellowish. Shows excellent mechanical and chemical resistance while it maintains its transparency and elasticity for a long time. It is also used as a transparent binder resin for exterior or interior decorative stone carpet floorings with natural colored stone chips. Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. CE marked.

Download the technical specifications

Primer-S 165

PRIMER-S-165-1.jpg

Transparent adhesion promoter of ISOFLEX-PU 650

Transparent adhesion promoter applied to clean non-absorbent surfaces ensuring the excellent adhesion of ISOFLEX-PU 650 waterproofing membrane to them (e.g. on non-absorbent glazed surfaces, glazed tiles, glass, glass bricks etc.). It should not be applied on transparent plastic materials, such as polycarbonate sheets.

Download the technical specifications

Primer-PU 140

PRIMER-PU-140.png

Two-component, solvent-free, polyurethane primer

Two-component, solvent-free, polyurethane primer that enables the adhesion of ISOFLEX-PU membranes for flat roofs. Suitable for absorbent or non-absorbent surfaces, such as concrete, screeds, metal, wood, old waterproofing layers, bituminous substrates, etc. Ideal for substrates of high moisture content in order to avoid problems in the ISOFLEX-PU membrane.


Download the technical specifications

Varnish-PU 650 MF

VARNISH-PU-650-MF.png

One-component, transparent, aliphatic polyurethane coating with satin finish

One-component, transparent, aliphatic polyurethane coating used to achieve satin finish over ISOFLEX-PU 650. It is watertight, continuous (without seams or joints), flexible and stable to UV radiation. It does not turn yellowish over time and shows excellent mechanical and chemical strength offering an effective waterproofing and protection solution for surfaces with old tile layers, natural stones, glass bricks, wood, concrete etc.


Download the technical specifications

SM-16

SM-16.png

Special solvent for polyurethane and epoxy coatings

Solvent used to dilute polyurethane or epoxy coatings. Ideal for thinning the liquid-applied polyurethane waterproofing membranes ISOFLEX-PU 500, when applied by spraying. Also used to clean tools in the application of ISOFLEX-PU 500 or tools covered with epoxy residues. Regarding polyurethane coatings, SM-16 is added up to 10% by weight.

Download the technical specifications

Flex-Primer

High-quality, acrylic, water based primer

Highly penetrative, polymer emulsion. It stabilises porous substrates and ensures the proper adhesion of water-based paints, tile adhesives, flexible mortars, brushable, elastomeric coatings, acrylic renders, etc. By penetrating inside the pores of the substrate, it acts as a bonding layer between the substrate and the paint, adhesive, mortar, coating, etc. to be applied.

Download the technical specifications

Want to find out more?